E-TON Beamer Wartungshandbuch PDF herunterladen (Seite 11)

Beamer Rev-2.0.2 Page 11 of 55 11/21/2005

2.8 IDLE SPEED

Connect a tachometer.

Warm up the engine for at least 10 minutes.

Turn the idle-speed adjust screw on the carburetor

to obtain the idle speed. "Turn in" (clockwise)

to get higher speed. "Turn out" (counter clockwise)

to get lower speed.

IDLE SPEED: 1600±100 rpm

2.9 BRAKE SYSTEM

Inspect the front brake lever and cable for

excessive play or other damage.

Replace or repair if necessary.

Measure the free play of the brake lever at the end

of the brake lever.

The standard of free play is 15-25 mm.

Inspect the rear brake lever and cable for

excessive play or other damage.

Replace or repair if necessary.

Measure the free play of the rear brake lever at

the end of the lever. The standard is 15-25 mm.

Adjust the free play of the rear brake lever by

turning the adjuster on the rear axle.

Idle Ad

ustment Screw

Air Mixture

ustment Screw

www.Get2itParts.com

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 64 65

Keine Kommentare

E-TON Beamer Wartungshandbuch Seite 11